2020 High quality 200 Alloy - Pure nickel resistance wire – TANKII
2020 High quality 200 Alloy - Pure nickel resistance wire – TANKII Detail:
Pure nickel resistance wire
Pure nickel wire has the characteristics of good strength at high temperature, good plasticity, poor thermal conductivity and high resistivity.
Application areas
Wire: Sputter Targets, evaporation pellets, regulator coil in glow plugs of diesel engines; litz wire for current conduction under elevated temperatures and in aggressive environments, Pre material for thin wire manfacturing, Ni wire mesh, Thermal Spraying, Coating layer for corrosion protection from alkalis; salt spray; molten salt and reduciing chemicals; coating layer for high temperature resistance; corrosion protection at high temperatures; coating layer for membrane walls of power plants
Processing history
For producing wire, the 6 mm hot rolled thick plates are cut into 6 mm wide sticks. The sticks are frontally welded. Afterwards the raw wire can be treated in the same way as hot rolled wire produced by melt metallurgy. accordingly, the wire is drawn to the desired dimensions through cold drawing and intermediate annealing.
Surface Finish
Blank/Bare/bright surface
| Pure nickel resistance wire | |
| Grade | Ni200, Ni201, Ni205 |
| Size | wire：φ0.1-12mm |
| Features | Good mechanical strength, corrosion resistance and high heat resistance strength. It is suitable for making vacuum devices, electronic instrument components, and filters for chemical production of strong alkalis. |
| Application | radio, electric light source, machinery manufacturing, chemical industry, and is an important structural material in vacuum electronic devices. |
Chemical Composition (Wt.%)
|
Nickel Grade |
Ni+Co |
Cu |
Si |
Mn |
C |
Cr |
S |
Fe |
Mg |
|
≥ |
≤ |
||||||||
|
Ni201 |
99.2 |
.25 |
.3 |
.35 |
.02 |
.2 |
.01 |
.3 |
- |
|
Ni200 |
99.0 |
.25 |
.3 |
.35 |
.15 |
.2 |
.01 |
.3 |
- |
Mechanical Properties
|
Grade |
Condition |
Diameter(mm) |
Tensile Strength N/mm2, Min |
Elongation, %,Min |
|
Ni200 |
M |
0.03-0.20 |
373 |
15 |
|
0.21-0.48 |
343 |
20 |
||
|
0.50-1.00 |
314 |
20 |
||
|
1.05-6.00 |
294 |
25 |
||
|
1/2Y |
0.10-0.50 |
686-883 |
- |
|
|
0.53-1.00 |
588-785 |
- |
||
|
1.05-5.00 |
490-637 |
- |
||
|
Y |
0.03-0.09 |
785-1275 |
- |
|
|
0.10-0.50 |
735-981 |
- |
||
|
0.53-1.00 |
686-883 |
- |
||
|
1.05-6.00 |
539-834 |
- |
||
|
Ni201 |
M |
0.03-0.20 |
422 |
15 |
|
0.21-0.48 |
392 |
20 |
||
|
0.50-1.00 |
373 |
20 |
||
|
1.05-6.00 |
343 |
25 |
||
|
1/2Y |
0.10-0.50 |
785-981 |
- |
|
|
0.53-1.00 |
686-834 |
- |
||
|
1.05-5.00 |
539-686 |
- |
||
|
Y |
0.03-0.09 |
883-1325 |
- |
|
|
0.10-0.50 |
834-1079 |
- |
||
|
0.53-1.00 |
735-981 |
- |
||
|
1.05-6.00 |
637-883 |
- |
Dimension and Tolerance (mm)
|
Diameter |
0.025-0.03 |
>0.03-0.10 |
>0.10-0.40 |
>0.40-0.80 |
>0.80-1.20 |
>1.20-2.00 |
|
Tolerance |
±0.0025 |
±0.005 |
±0.006 |
±0.013 |
±0.02 |
±0.03 |
Remarks:
1). Condition: M=Soft.1/2Y=1/2Hard, Y= Hard
2). If you have resistivity demand, also we melt for you.
Product detail pictures:
Related Product Guide:
"Sincerity, Innovation, Rigorousness, and Efficiency" is definitely the persistent conception of our corporation to the long-term to establish alongside one another with customers for mutual reciprocity and mutual profit for 2020 High quality 200 Alloy - Pure nickel resistance wire – TANKII , The product will supply to all over the world, such as: United States, Albania, Hamburg, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Candance from Angola - 2017.03.28 12:22
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By Nick from Sri Lanka - 2017.12.09 14:01
