Welcome to our websites!

750 Alloy, Fe-cr-al Electric Heater Strip Iron Chrome Aluminum Resistance Alloy Solid Bright Heating Strip

Short Description:


  • Grade : FECRAL 125
  • Shape: Strip ,plate
  • Resisivity: 1.25
  • Density: 7.40g/cm3
  • Color: Bright
  • Application: Resistor
  • Product Detail

    FAQ

    Product Tags

    Iron Chrome Aluminum 750 Alloy, Fe-Cr-Al heating resistance Alloy Strip

     

    Chemical Content, %

    C P S Mn Si Cr Ni Al Fe Other
    Max
    0.12 0.025 0.020 0.50 ≤0.7 12.0~15.0 ≤0.60 4.0~6.0 Balance -

     

    Mechanical Properties

    Max Continuous Service Temperature:
    Resisivity 20ºC:
    Density:
    Thermal Conductivity:
    Coefficient of Thermal Expansion:
    Melting Point:
    Elongation:
    Micrographic Structure:
    Magnetic Property:
    950ºC
    1.25ohm mm2/m
    7.40g/cm3
    52.7 KJ/m·h·ºC
    15.4×10-6/ºC (20ºC~1000ºC)
    1450ºC
    Min 16%
    Ferrite
    magnetic

     

    Temperature Factor of Electrical Resistivity

    20ºC 100ºC 200ºC 300ºC 400ºC 500ºC 600ºC
    1.000 1.005 1.014 1.028 1.044 1.064 1.090
     
    700ºC 800ºC 900ºC 1000ºC 1100ºC 1200ºC 1300ºC
    1.120 1.132 1.142 1.150 - - -

    Feature:
    With long service life.Heating up fast.High thermal efficiency.Temperature uniformity. Can use vertically. When being used in the rated voltage,there is no volatile matter.It i the ne environmental protection electric heating wire.And an alternative to the costly nichrome wire.Can be customized according to customer requirements

    Usage:
    It is widely used in industrial furnace, household electrical appliances, infrared heater, etc.

    The key properties:
    1.The thickness of surface insulation resistance to oxidation layer: 5-15 μ m.
    2. Insulation resistance: multimeter detection infinity.
    3.The voltage-endurance of insulating single layer is greater than the alternating voltage 60 ν without breakdown.
    4. The use of voltage: 6-380 ν.
    5. Using temperature: Maximum1200 ºC
    6. Service life: not less than 6000 hours.
    7.Thermal shock performance: Electric heating element can withstand the cold and hot impact 600-6000 times without deformation.


  • Previous:
  • Next:

  • Write your message here and send it to us