China China Manufacturer for Evanohm - Soft Magnetic Alloy Wire Ni77mo4cu5 – TANKII Manufacture and Factory

China Manufacturer for Evanohm - Soft Magnetic Alloy Wire Ni77mo4cu5 – TANKII

Short Description:

Send email to us

Product Detail

FAQ

Product Tags

Feedback (2)

Being supported by an advanced and professional IT team, we could offer technical support on pre-sales & after-sales service for Alloy 180 , N6 , Mws-294 , The many thoughts and suggestions is going to be drastically appreciated! The great cooperation could boost each of us into better development!

China Manufacturer for Evanohm - Soft Magnetic Alloy Wire Ni77mo4cu5 – TANKII Detail:

Normal composition%

Ni	75.5~78	Fe	Bal.	Mn	0.3~0.6	Si	0.15~0.3
Mo	3.9~4.5	Cu	4.8~6.0
C	≤0.03	P	≤0.02	S	≤0.02

Typical Mechanical properties

Yield strength	Tensile Strength	Elongation
Mpa	Mpa	%
980	980	2~40

Typical Physical properties

Density (g/cm3)	8.6
Electrical resistivity at 20ºC(Om*mm2/m)	0.55
Coefficient of linear expansion(20ºC~200ºC)X10-6/ºC	10.3~11.5
Saturation magnetostriction coefficient λθ/ 10-6	2.4
Curie point Tc/ ºC	350

The magnetic properties of alloys with high permeability in weak fields
1J77	Initial permeability	Maximum permeability			Coercivity	Saturation magnetic induction intensity
Сold-rolled strip/ sheet. Thickness, mm	μ0.08/ (mH/m)		μm/ (mH/m)	Hc/ (A/m)			BS/ T
	≥			≤
0.01 mm	17.5		87.5	5.6			0.75
0.1~0.19 mm	25.0		162.5	2.4
0.2~0.34 mm	28.0		225.0	1.6
0.35~1.0 mm	30.0		250.0	1.6
1.1~2.5 mm	27.5		225.0	1.6
2.6~3.0 mm	26.3		187.5	2.0
cold drawn wire
0.1 mm	6.3		50	6.4
Bar
8-100 mm	25		100	3.2

Mode of heat treatment
Annealing media	Vacuum with a residual pressure not higher than 0.1Pa, hydrogen with a dew point of not higher than minus 40 ºC.
The heating temperature and rate	1100~1150ºC
Holding time	3~6
Cooling rate	With 100 ~ 200 ºC/ h cooled to 600 ºC, rapidly cooled to 300ºC

Product detail pictures:

Related Product Guide:

Adhering to the principle of "quality, service, efficiency and growth", we have gained trusts and praises from domestic and international client for China Manufacturer for Evanohm - Soft Magnetic Alloy Wire Ni77mo4cu5 – TANKII , The product will supply to all over the world, such as: Armenia, Boston, Tunisia, We'd like to invite customers from abroad to discuss business with us. We can provide our clients with high quality products and excellent service. We are sure that we will have good cooperative relationships and make a brilliant future for both parties.

Alloy 230

Balco

The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.