Factory Cheap Hot Electrical And Electronic Leads And Springs - Pure nickel resistance wire – TANKII
Factory Cheap Hot Electrical And Electronic Leads And Springs - Pure nickel resistance wire – TANKII Detail:
Pure nickel resistance wire
Pure nickel wire has the characteristics of good strength at high temperature, good plasticity, poor thermal conductivity and high resistivity.
Application areas
Wire: Sputter Targets, evaporation pellets, regulator coil in glow plugs of diesel engines; litz wire for current conduction under elevated temperatures and in aggressive environments, Pre material for thin wire manfacturing, Ni wire mesh, Thermal Spraying, Coating layer for corrosion protection from alkalis; salt spray; molten salt and reduciing chemicals; coating layer for high temperature resistance; corrosion protection at high temperatures; coating layer for membrane walls of power plants
Processing history
For producing wire, the 6 mm hot rolled thick plates are cut into 6 mm wide sticks. The sticks are frontally welded. Afterwards the raw wire can be treated in the same way as hot rolled wire produced by melt metallurgy. accordingly, the wire is drawn to the desired dimensions through cold drawing and intermediate annealing.
Surface Finish
Blank/Bare/bright surface
| Pure nickel resistance wire | |
| Grade | Ni200, Ni201, Ni205 |
| Size | wire：φ0.1-12mm |
| Features | Good mechanical strength, corrosion resistance and high heat resistance strength. It is suitable for making vacuum devices, electronic instrument components, and filters for chemical production of strong alkalis. |
| Application | radio, electric light source, machinery manufacturing, chemical industry, and is an important structural material in vacuum electronic devices. |
Chemical Composition (Wt.%)
|
Nickel Grade |
Ni+Co |
Cu |
Si |
Mn |
C |
Cr |
S |
Fe |
Mg |
|
≥ |
≤ |
||||||||
|
Ni201 |
99.2 |
.25 |
.3 |
.35 |
.02 |
.2 |
.01 |
.3 |
- |
|
Ni200 |
99.0 |
.25 |
.3 |
.35 |
.15 |
.2 |
.01 |
.3 |
- |
Mechanical Properties
|
Grade |
Condition |
Diameter(mm) |
Tensile Strength N/mm2, Min |
Elongation, %,Min |
|
Ni200 |
M |
0.03-0.20 |
373 |
15 |
|
0.21-0.48 |
343 |
20 |
||
|
0.50-1.00 |
314 |
20 |
||
|
1.05-6.00 |
294 |
25 |
||
|
1/2Y |
0.10-0.50 |
686-883 |
- |
|
|
0.53-1.00 |
588-785 |
- |
||
|
1.05-5.00 |
490-637 |
- |
||
|
Y |
0.03-0.09 |
785-1275 |
- |
|
|
0.10-0.50 |
735-981 |
- |
||
|
0.53-1.00 |
686-883 |
- |
||
|
1.05-6.00 |
539-834 |
- |
||
|
Ni201 |
M |
0.03-0.20 |
422 |
15 |
|
0.21-0.48 |
392 |
20 |
||
|
0.50-1.00 |
373 |
20 |
||
|
1.05-6.00 |
343 |
25 |
||
|
1/2Y |
0.10-0.50 |
785-981 |
- |
|
|
0.53-1.00 |
686-834 |
- |
||
|
1.05-5.00 |
539-686 |
- |
||
|
Y |
0.03-0.09 |
883-1325 |
- |
|
|
0.10-0.50 |
834-1079 |
- |
||
|
0.53-1.00 |
735-981 |
- |
||
|
1.05-6.00 |
637-883 |
- |
Dimension and Tolerance (mm)
|
Diameter |
0.025-0.03 |
>0.03-0.10 |
>0.10-0.40 |
>0.40-0.80 |
>0.80-1.20 |
>1.20-2.00 |
|
Tolerance |
±0.0025 |
±0.005 |
±0.006 |
±0.013 |
±0.02 |
±0.03 |
Remarks:
1). Condition: M=Soft.1/2Y=1/2Hard, Y= Hard
2). If you have resistivity demand, also we melt for you.
Product detail pictures:
Related Product Guide:
We normally think and practice corresponding on the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and also the living for Factory Cheap Hot Electrical And Electronic Leads And Springs - Pure nickel resistance wire – TANKII , The product will supply to all over the world, such as: Ghana, Iran, Turkey, Our objective is "to supply first step products and best service for our customers, thus we are sure you must have a margin benefit through cooperating with us". If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
By Kitty from Uganda - 2018.11.11 19:52
This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
By Agnes from Rwanda - 2018.02.04 14:13
