China Factory Cheap Hot Electrical And Electronic Leads And Springs - Pure nickel resistance wire – TANKII Manufacture and Factory

Factory Cheap Hot Electrical And Electronic Leads And Springs - Pure nickel resistance wire – TANKII

Short Description:

Send email to us

Product Detail

FAQ

Product Tags

Feedback (2)

Dedicated to strict top quality command and considerate purchaser support, our experienced staff customers are always available to discuss your necessities and be certain full client gratification for Open Coil Air Duct Heaters , Nikrothal 70 , Room Air Conditioning/Heating Units , For even more inquires remember to do not hesitate to get in touch with us. Thank you - Your support continuously inspires us.

Factory Cheap Hot Electrical And Electronic Leads And Springs - Pure nickel resistance wire – TANKII Detail:

Pure nickel resistance wire

Pure nickel wire has the characteristics of good strength at high temperature, good plasticity, poor thermal conductivity and high resistivity.

Application areas

Wire: Sputter Targets, evaporation pellets, regulator coil in glow plugs of diesel engines; litz wire for current conduction under elevated temperatures and in aggressive environments, Pre material for thin wire manfacturing, Ni wire mesh, Thermal Spraying, Coating layer for corrosion protection from alkalis; salt spray; molten salt and reduciing chemicals; coating layer for high temperature resistance; corrosion protection at high temperatures; coating layer for membrane walls of power plants

Processing history

For producing wire, the 6 mm hot rolled thick plates are cut into 6 mm wide sticks. The sticks are frontally welded. Afterwards the raw wire can be treated in the same way as hot rolled wire produced by melt metallurgy. accordingly, the wire is drawn to the desired dimensions through cold drawing and intermediate annealing.

Surface Finish

Blank/Bare/bright surface

Pure nickel resistance wire
Grade	Ni200, Ni201, Ni205
Size	wire：φ0.1-12mm
Features	Good mechanical strength, corrosion resistance and high heat resistance strength. It is suitable for making vacuum devices, electronic instrument components, and filters for chemical production of strong alkalis.
Application	radio, electric light source, machinery manufacturing, chemical industry, and is an important structural material in vacuum electronic devices.

Chemical Composition (Wt.%)

Nickel Grade	Ni+Co	Cu	Si	Mn	C	Cr	S	Fe	Mg
Nickel Grade	≥	≤
Ni201	99.2	.25	.3	.35	.02	.2	.01	.3	-
Ni200	99.0	.25	.3	.35	.15	.2	.01	.3	-

Mechanical Properties

Grade	Condition	Diameter(mm)	Tensile Strength N/mm2, Min	Elongation, %,Min
Ni200	M	0.03-0.20	373	15
		0.21-0.48	343	20
		0.50-1.00	314	20
		1.05-6.00	294	25
	1/2Y	0.10-0.50	686-883	-
		0.53-1.00	588-785	-
		1.05-5.00	490-637	-
	Y	0.03-0.09	785-1275	-
		0.10-0.50	735-981	-
		0.53-1.00	686-883	-
		1.05-6.00	539-834	-
Ni201	M	0.03-0.20	422	15
		0.21-0.48	392	20
		0.50-1.00	373	20
		1.05-6.00	343	25
	1/2Y	0.10-0.50	785-981	-
		0.53-1.00	686-834	-
		1.05-5.00	539-686	-
	Y	0.03-0.09	883-1325	-
		0.10-0.50	834-1079	-
		0.53-1.00	735-981	-
		1.05-6.00	637-883	-

Dimension and Tolerance (mm)

Diameter	0.025-0.03	>0.03-0.10	>0.10-0.40	>0.40-0.80	>0.80-1.20	>1.20-2.00
Tolerance	±0.0025	±0.005	±0.006	±0.013	±0.02	±0.03

Remarks:

1). Condition: M=Soft.1/2Y=1/2Hard, Y= Hard

2). If you have resistivity demand, also we melt for you.

Product detail pictures:

Related Product Guide:

Our focus on should be to consolidate and enhance the quality and repair of present products, in the meantime constantly establish new products to meet unique customers' requires for Factory Cheap Hot Electrical And Electronic Leads And Springs - Pure nickel resistance wire – TANKII , The product will supply to all over the world, such as: Georgia, Haiti, Victoria, As operation principle is "be market-oriented , good faith as principle, win-win as objective", holding on "customer first, quality assurance, service first" as our purpose, dedicated to provide the original quality, create excellence service , we won the praise and trust in the industry of auto parts. In the future, We will provide quality product and excellent service in return to our customers , welcome any suggestions and feedback from all over the world.

205 Alloy

Alloy 205

Food-Handling Equipment

Mechanical Components

We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.