China Manufactory Direct of Cuni30 Copper Nickel Alloy wire in Electric Power Industry Manufacture and Factory

Manufactory Direct of Cuni30 Copper Nickel Alloy wire in Electric Power Industry

Short Description:

Material: CuNi5 CuNi10(C70600) CuNi20 (C71000) CuNi25(C71300), CuNi30(C71500) in from of sheet/plate/strip. CuNi23Mn low resistance heating alloy is widely used in low-voltage circuit breaker, thermal overload relay, and other low-voltage electrical product. It is one of the key materials of the low-voltage electrical products. The materials produced by our company have the characteristics of good resistance consistency and superior stability. We can supply all kinds of round wire, flat and sheet materials.

Send email to us

Product Detail

FAQ

Product Tags

Manufactory Direct of Cuni30 Copper Nickel Alloy wire in Electric Power Industry
Material: CuNi5 CuNi10(C70600) CuNi20 (C71000) CuNi25(C71300), CuNi30(C71500) in from of sheet/plate/strip
Product Description
CuNi23Mn low resistance heating alloy is widely used in low-voltage circuit breaker, thermal overload relay, and other low-voltage electrical product. It is one of the key materials of the low-voltage electrical products. The materials produced by our company have the characteristics of good resistance consistency and superior stability. We can supply all kinds of round wire, flat and sheet materials.
Chemical Content, %

Ni	Mn	Fe	Si	Cu	Other	ROHS Directive
						Cd	Pb	Hg	Cr
30	1.0	-	-	Bal	-	ND	ND	ND	ND

Mechanical Properties

Max Continuous Service Temp	350ºC
Resisivity at 20ºC	0.35%ohm mm2/m
Density	8.9 g/cm3
Thermal Conductivity	10(Max)
Melting Point	1170ºC
Tensile Strength,N/mm2 Annealed,Soft	400 Mpa
Tensile Strength,N/mm2 Cold Rolled	Mpa
Elongation(anneal)	25% (Max)
Elongation(cold rolled)	(Max)
EMF vs Cu, μV/ºC (0~100ºC)	-37
Micrographic Structure	austenite
Magnetic Property	Non