China Manufacturer for Mechanical Components - Nickel 212/UNS N02212 Nickel-Manganese Alloys As Fuses – TANKII Manufacture and Factory

Manufacturer for Mechanical Components - Nickel 212/UNS N02212 Nickel-Manganese Alloys As Fuses – TANKII

Short Description:

Send email to us

Product Detail

FAQ

Product Tags

Feedback (2)

Innovation, excellent and reliability are the core values of our firm. These principles today more than ever form the basis of our success as an internationally active mid-size corporation for Stablohm 750 , Heater , Convection Heaters , Let's cooperate hand in hand to jointly make a beautiful future. We sincerely welcome you to visit our company or contact us for cooperation!

Manufacturer for Mechanical Components - Nickel 212/UNS N02212 Nickel-Manganese Alloys As Fuses – TANKII Detail:

Nickel 212 is also similar to Nickel 200 with manganese addition to improve strength.

Nickel 212 is used as fuses for lead-in-wire components in light bulbs. It is also used as lead wires for electrical components and as supporting components in electronic valves and cathode ray tubes. It is also finds use as electrodes in glow discharge lamps.

Chemical Composition

Element	Min %	Max %
Ni + Co	97.0	–
Mn	1.50	2.50
Fe	–	0.25
C	–	0.10
Cu	–	0.20
Si	–	0.20
Mg	–	0.20
S	–	0.006

Density	Melting Point	Coefficient of Expansion	Modulus of Rigidity	Modulus of Elasticity
8.86 g/cm³	1446 °C	12.9 μm/m °C (20 – 100 °C)	78 kN/mm²	196 kN/mm²
0.320 lb/in³	2635 °F	7.2 x 10^-6 in/in °F (70 – 212 °F)	11313 ksi	28400 ksi

Product detail pictures:

Related Product Guide:

All we do is usually affiliated with our tenet " Buyer to start with, Belief to start with, devoting about the food packaging and environmental defense for Manufacturer for Mechanical Components - Nickel 212/UNS N02212 Nickel-Manganese Alloys As Fuses – TANKII , The product will supply to all over the world, such as: Florence, London, Naples, Selling our products and solutions causes no risks and brings high returns to your company instead. It is our consistent pursuit to create value for clients. Our company is looking for agents sincerely. What are you waiting for? Come and join us. Now or never.

205 Alloy

Alloy 200

Alloy 201

Alloy 205

Alloy K205

Food-Handling Equipment

A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.

By Lillian from Puerto Rico - 2017.04.08 14:55

The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!

By Louise from Bangladesh - 2018.07.12 12:19

Write your message here and send it to us