Manufacturer for Mechanical Components - Pure nickel resistance wire – TANKII
Manufacturer for Mechanical Components - Pure nickel resistance wire – TANKII Detail:
Pure nickel resistance wire
Pure nickel wire has the characteristics of good strength at high temperature, good plasticity, poor thermal conductivity and high resistivity.
Application areas
Wire: Sputter Targets, evaporation pellets, regulator coil in glow plugs of diesel engines; litz wire for current conduction under elevated temperatures and in aggressive environments, Pre material for thin wire manfacturing, Ni wire mesh, Thermal Spraying, Coating layer for corrosion protection from alkalis; salt spray; molten salt and reduciing chemicals; coating layer for high temperature resistance; corrosion protection at high temperatures; coating layer for membrane walls of power plants
Processing history
For producing wire, the 6 mm hot rolled thick plates are cut into 6 mm wide sticks. The sticks are frontally welded. Afterwards the raw wire can be treated in the same way as hot rolled wire produced by melt metallurgy. accordingly, the wire is drawn to the desired dimensions through cold drawing and intermediate annealing.
Surface Finish
Blank/Bare/bright surface
| Pure nickel resistance wire | |
| Grade | Ni200, Ni201, Ni205 |
| Size | wire：φ0.1-12mm |
| Features | Good mechanical strength, corrosion resistance and high heat resistance strength. It is suitable for making vacuum devices, electronic instrument components, and filters for chemical production of strong alkalis. |
| Application | radio, electric light source, machinery manufacturing, chemical industry, and is an important structural material in vacuum electronic devices. |
Chemical Composition (Wt.%)
|
Nickel Grade |
Ni+Co |
Cu |
Si |
Mn |
C |
Cr |
S |
Fe |
Mg |
|
≥ |
≤ |
||||||||
|
Ni201 |
99.2 |
.25 |
.3 |
.35 |
.02 |
.2 |
.01 |
.3 |
- |
|
Ni200 |
99.0 |
.25 |
.3 |
.35 |
.15 |
.2 |
.01 |
.3 |
- |
Mechanical Properties
|
Grade |
Condition |
Diameter(mm) |
Tensile Strength N/mm2, Min |
Elongation, %,Min |
|
Ni200 |
M |
0.03-0.20 |
373 |
15 |
|
0.21-0.48 |
343 |
20 |
||
|
0.50-1.00 |
314 |
20 |
||
|
1.05-6.00 |
294 |
25 |
||
|
1/2Y |
0.10-0.50 |
686-883 |
- |
|
|
0.53-1.00 |
588-785 |
- |
||
|
1.05-5.00 |
490-637 |
- |
||
|
Y |
0.03-0.09 |
785-1275 |
- |
|
|
0.10-0.50 |
735-981 |
- |
||
|
0.53-1.00 |
686-883 |
- |
||
|
1.05-6.00 |
539-834 |
- |
||
|
Ni201 |
M |
0.03-0.20 |
422 |
15 |
|
0.21-0.48 |
392 |
20 |
||
|
0.50-1.00 |
373 |
20 |
||
|
1.05-6.00 |
343 |
25 |
||
|
1/2Y |
0.10-0.50 |
785-981 |
- |
|
|
0.53-1.00 |
686-834 |
- |
||
|
1.05-5.00 |
539-686 |
- |
||
|
Y |
0.03-0.09 |
883-1325 |
- |
|
|
0.10-0.50 |
834-1079 |
- |
||
|
0.53-1.00 |
735-981 |
- |
||
|
1.05-6.00 |
637-883 |
- |
Dimension and Tolerance (mm)
|
Diameter |
0.025-0.03 |
>0.03-0.10 |
>0.10-0.40 |
>0.40-0.80 |
>0.80-1.20 |
>1.20-2.00 |
|
Tolerance |
±0.0025 |
±0.005 |
±0.006 |
±0.013 |
±0.02 |
±0.03 |
Remarks:
1). Condition: M=Soft.1/2Y=1/2Hard, Y= Hard
2). If you have resistivity demand, also we melt for you.
Product detail pictures:
Related Product Guide:
As for competitive selling prices, we believe that you will be searching far and wide for anything that can beat us. We will state with absolute certainty that for such excellent at such charges we are the lowest around for Manufacturer for Mechanical Components - Pure nickel resistance wire – TANKII , The product will supply to all over the world, such as: Bahrain, Oman, United Kingdom, In order to meet our market demands, we have paied more attention to the quality of our products and services. Now we can meet customers' special requirements for special designs. We persistently develop our enterprise spirit "quality lives the enterprise, credit assures cooperation and keep the motto in our minds: customers first.
By Julia from Japan - 2018.05.22 12:13
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Christine from Cape Town - 2018.06.28 19:27
