China Copper Nickel Apply CuNi44 NC050 CuNi44Mn Wire Manufacture and Factory

Copper Nickel Apply CuNi44 NC050 CuNi44Mn Wire

Short Description:

Send email to us

Product Detail

FAQ

Product Tags

Material: CuNi5 CuNi10(C70600) CuNi20 (C71000) CuNi25(C71300), CuNi30(C71500) in from of sheet/plate/strip

Product Description
CuNi23Mn low resistance heating alloy is widely used in low-voltage circuit breaker, thermal overload relay, and other low-voltage electrical product. It is one of the key materials of the low-voltage electrical products. The materials produced by our company have the characteristics of good resistance consistency and superior stability. We can supply all kinds of round wire, flat and sheet materials.
Chemical Content, %

Ni	Mn	Fe	Si	Cu	Other	ROHS Directive
						Cd	Pb	Hg	Cr
30	1.0	-	-	Bal	-	ND	ND	ND	ND

Mechanical Properties

Max Continuous Service Temp	350ºC
Resisivity at 20ºC	0.35%ohm mm2/m
Density	8.9 g/cm3
Thermal Conductivity	10(Max)
Melting Point	1170ºC
Tensile Strength,N/mm2 Annealed,Soft	400 Mpa
Tensile Strength,N/mm2 Cold Rolled	Mpa
Elongation(anneal)	25% (Max)
Elongation(cold rolled)	(Max)
EMF vs Cu, μV/ºC (0~100ºC)	-37
Micrographic Structure	austenite
Magnetic Property	Non

Resistance Alloy- CuNi30Mn Sizes / Temper Capabilities
Condition: Bright, Annealed, Soft
Wire diameter 0.02mm-1.0mm packing in spool, big than 1.0mm packing in coil
Rod, Bar diameter 1mm-30mm
Strip: Thickness 0.01mm-7mm, Width 1mm-280mm
Enameled condition is available

Previous: Soft Magnetic Alloy 1J31 Rod

Next:

CUNI44