Welcome to our websites!

Ni200 – 100FT 34 Gauge AWG Pure Nickel 200 Non Resistance Wire 0.16002mm

Short Description:

Nickel 201 can be hot formed to almost any shape. The temperature range 1200°F to 2250°F is recommended and should be carefully abided as the proper temperature is the most important factor in achieving hot malleability. Full information of the forming process should be sought and understood before proceeding.

Nickel 201 can be cold formed by all conventional methods, but because nickel alloys have greater stiffness than stainless steels more power is required to perform the operations.

Nickel 201 is the low carbon version of Nickel 200. It is preferred to Nickel 200 for applications involving exposure to temperatures above 600°F. With low base hardness and lower work-hardening rate, it is particularly suited for cold forming.


  • Certificate: ISO 9001
  • Size: Customized
  • Port : Shanghai
  • Application: resistance application
  • Conductor type : solid
  • color: as client's requirement
  • standard: ASTM F2063
  • size : as client's requirement
  • surface : bright
  • surface treatment : polishing
  • feature : high resistance
  • Elongation : ≥25 %
  • Product Detail

    FAQ

    Product Tags

    Constantan Wire with moderate resistivity and low temperature coefficent of resistance with a flat resistance/temperature curve over a wider range than the “manganins”. Constantan also shows better corrosion resistance than the man ganins. Uses tend to be restricted to ac circuits.

    Constantan wire is also the negative element of the type J thermocouple with Iron being the positive; type J thermocouples are used in heat treating applications. Also, it is the negative element of the type T thermocouple with OFHC Copper the positive; type T thermocouples are used at cryogenic temperatures.

    Copper nickel alloy series: Constantan CuNi40 (6J40), CuNi1, CuNi2, CuNi6, CuNi8, CuNi10, CuNi14, CuNi19, CuNi23,CuNi30, CuNi34, CuNi44.

    Size dimension range:
    Wire: 0.1-10mm
    Ribbons: 0.05*0.2-2.0*6.0mm
    Strip: 0.05*5.0-5.0*250mm

    Main grades and properties

    Type Electrical resistivity
    (20degreeΩ
    mm²/m)
    temperature coefficient of resistance
    (10^6/degree)
    Dens
    ity
    g/mm²
    Max. temperature
    (°c)
    Melting point
    (°c)
    CuNi1 0.03 <1000 8.9 / 1085
    CuNi2 0.05 <1200 8.9 200 1090
    CuNi6 0.10 <600 8.9 220 1095
    CuNi8 0.12 <570 8.9 250 1097
    CuNi10 0.15 <500 8.9 250 1100
    CuNi14 0.20 <380 8.9 300 1115
    CuNi19 0.25 <250 8.9 300 1135
    CuNi23 0.30 <160 8.9 300 1150
    CuNi30 0.35 <100 8.9 350 1170
    CuNi34 0.40 -0 8.9 350 1180
    CuNi40 0.48 ±40 8.9 400 1280
    CuNi44 0.49 <-6 8.9 400 1280

    Mechanical Properties

    Max Continuous Service Temp 400ºC
    Resisivity at 20ºC 0.49±5%ohm mm2/m
    Density 8.9 g/cm3
    Thermal Conductivity -6(Max)
    Melting Point 1280ºC
    Tensile Strength,N/mm2   Annealed,Soft 340~535 Mpa
    Tensile Strength,N/mm3   Cold Rolled 680~1070 Mpa
    Elongation(anneal) 25%(Min)
    Elongation(cold rolled) ≥Min)2%(Min)
    EMF vs Cu, μV/ºC (0~100ºC) -43
    Micrographic Structure austenite
    Magnetic Property Non

     

    Shanghai Tankii Alloy Material Co., Ltd. Focus on the production of resistance alloy(nichrome Alloy, FeCrAl Alloy, copper nickel alloy, thermocouple wire, precision alloy and thermal spray alloy in the form of wire, sheet, tape, strip, rod and plate. We’ve already got ISO9001 quality system certificate and approval of ISO14001 environmental protection system. We own a complete set of advanced production flow of refining, cold reduction, drawing and heat treating etc. We also proudly have independent R&D capacity.

    Shanghai Tankii Alloy Material Co., Ltd has accumulated lots of experiences over 35 years in this field. During these years, more than 60 management elites and high science and technology talents were employed. They participated in every walk of the company life, which make our company keep blooming and invincible in the competitive market. Based on the principle of “first quality, sincere service”, our managing ideology is pursuing technology innovation and creating the top brand in the alloy field. We persist in Quality – the foundation of the survival. It is our forever ideology to serve you with full heart and soul. We committed to provide customers all over the world with high-quality, competitive products and perfect service.

    Our products, such us nichrome alloy, precision alloy, thermocouple wire, fecral alloy, copper nickel alloy, thermal spray alloy have been exported to over 60 countries in the world. We are willing to establish strong and long-time partnership with our customers. Most complete range of products dedicated to Resistance, Thermocouple and Furnace manufacturers Quality with end to end production control Technical support and Customer Service.





  • Previous:
  • Next:

  • Write your message here and send it to us