Welcome to our websites!
Nickel alloy 75E TA/FA 75B NiAl95/5 Ni95Al5 Wire for Arc Thermal Spraying
1.6mm 3.17mm TA FA 75B NiAl95/5 Ni95Al5 Wire for Arc Thermal Spraying
Chemical Composition:
NiAl95/5 thermal spray wire has high nickel and 4.5~5.5% Aluminum, other chemical composition see below sheet:
| Al | Ni | Mn | Ti | Si | Fe | Cu | C |
| 4.5~5.5 | Bal. | Max0.3 | Max0.4 | Max0.5 | Max0.3 | Max0.08 | Max0.005 |
Chemical Composition test machine:
NiAl95/5 thermal spray wire is a solid wire specifically designed for arc spray systems. It is self-bonding to most materials and requires minimal surface preparation.
Physical Properties:
Main physical properties of NiAl95/5 thermal spray wire is density, size and melting point.
| Density.g/cm3 | Normal size.mm | Melting point.ºC |
| 8.5 | 1.6mm-3.2mm | 1450 |
Typical Deposit Characteristics:
| Typical Hardness | HRB 75 |
| Bonding Strength | Min 55Mpa |
| Deposit Rate | 10 lbs/hr/100A |
| Deposit Efficiency | 70% |
| Wire Coverage | 0.9 oz/ft2/mil |
Write your message here and send it to us
