China Manganese Copper Alloy Strip / Wire / Sheet 6J12 for Shunt Manufacture and Factory

Manganese Copper Alloy Strip / Wire / Sheet 6J12 for Shunt

Short Description:

Model NO.: manganin sheet

Surface: Birght

Thickness: 0.1-3.0mm

Density: 8.4G/Cm3

Resistivity: 0.44

Application: Water Heater, Air Condition or Refrigerator

Send email to us

Product Detail

FAQ

Product Tags

Feedback (2)

It truly is our responsibility to fulfill your requirements and successfully provide you. Your fulfillment is our best reward. We're seeking forward in your check out for joint development for 400 Alloy , Chromel D , Konstantan , If you have the requirement for any of our products, please contact us now. We are looking forward to hearing from you soon.

Manganese Copper Alloy Strip / Wire / Sheet 6J12 for Shunt Detail:

Product Description

Manganese Copper Alloy Strip / Wire / Sheet (6J8, 6J12, 6J13) for shunt

Product Description

Shunt Manganin widely used for Shunt resistor with the highest requirements, shunt manganin has been used in precision built electrical components such as Wheatstone bridges, decade boxes, voltage drivers, potentiometers and resistance standards.

Chemical Content, %

Ni	Mn	Fe	Si	Cu	Other	ROHS Directive
						Cd	Pb	Hg	Cr
2~5	11~13	<0.5	micro	Bal	-	ND	ND	ND	ND

Mechanical Properties

Max Continuous Service Temp	0-100ºC
Resisivity at 20ºC	0.44±0.04ohm mm2/m
Density	8.4 g/cm3
Thermal Conductivity	40 KJ/m·h·ºC
Temp Coefficient of Resistance at 20 ºC	0~40α×10-6/ºC
Melting Point	1450ºC
Tensile Strength(Hard)	585 Mpa(min)
Tensile Strength,N/mm2 Annealed,Soft	390-535
Elongation	6~15%
EMF vs Cu, μV/ºC (0~100ºC)	2(max)
Micrographic Structure	austenite
Magnetic Property	non
Hardness	200-260HB
Micrographic Structure	Ferrite
Magnetic Property	Magnetic

Product detail pictures:

Related Product Guide:

We have probably the most state-of-the-art output equipment, experienced and qualified engineers and workers, recognized good quality manage systems plus a friendly skilled income workforce pre/after-sales support for Manganese Copper Alloy Strip / Wire / Sheet 6J12 for Shunt , The product will supply to all over the world, such as: Borussia Dortmund, Detroit, Oman, As an experienced manufacturer we also accept customized order and we could make it the same as your picture or sample specification. The main goal of our company is to live a satisfactory memory to all the customers, and establish a long term business relationship with buyers and users all over the world.

6j12

Manganese Copper，

Shunt Resistor

Shunt Strip

Shunts And Other Electrical And Electronic Components

The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.

By Colin Hazel from Belarus - 2017.01.28 19:59

Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.

By Kelly from Anguilla - 2017.08.18 11:04

Write your message here and send it to us